×
Login Form
×
Registration
Profile Informations
Login Datas
or login
Details
This is a Simple to use MOSFET/Transistor Controller with Adjustable Sensitivity and Brakes. This controller features Pulse Width Modulation PWM Power and Transistor Braking. The brake function also features an Auto Brake Hold Function to provide a smoother and more precise control of the car under braking. This PWM Controller is aimed at the Serious Club racer, and is Simple to use and quick to setup to suit the Car and track conditions.
A221438 Commercial Track Quick Connect Socket installed free when ordered with Controller
Key Features
36 step wiper element and 9 point contact
PWM Drive with Transistor Braking
Brake adjustment (with automatic HOLD)
Sensitivity adjustment (with automatic CURVE)
Optional LAUNCH Switch for live start advantage - Please email if required.
Trigger return spring tension adjustment
Supplied with POSITIVE track wiring
Current rating of 12A peak and handling 5A constant
User-Changeable Single and Double Finger Trigger
Auto reset PTC fuse for over-current protection
LED with triple function
Supplied without a plug (Unterminated)
Commercial Track Quick Connect Socket (A221438) available
PWM Drive with Transistor Braking
Brake adjustment (with automatic HOLD)
Sensitivity adjustment (with automatic CURVE)
Optional LAUNCH Switch for live start advantage - Please email if required.
Trigger return spring tension adjustment
Supplied with POSITIVE track wiring
Current rating of 12A peak and handling 5A constant
User-Changeable Single and Double Finger Trigger
Auto reset PTC fuse for over-current protection
LED with triple function
Supplied without a plug (Unterminated)
Commercial Track Quick Connect Socket (A221438) available
Age Suitability 8+
Safety Notice: Warning! This product is not suitable for children under 36 months because of small parts which can present a choking hazard
Brake control
A single rotary control sets the braking strength and has a built-in hold circuit to release the brakes once the car has slowed to a speed relative to the amount of braking you have selected. The useful feature of this design is that the motor drives the brake circuit in such a way that the faster the car is going, the harder the brakes are applied. As the car slows, the brakes are gradually released to give a very balanced and predictable control. The brake and hold remain balanced to leave you free to race confidently.
Sensitivity control
This adjusts the trigger wiper sensitivity to enable you to set the controller feel for any car or track condition. For those used to resistor controllers, it will feel as if the Ohms are adjustable from about 15 up to 70. There is a built-in CURVE control circuit which works automatically together with the sensitivity adjustment to give quick and easy settings. As the Sensitivity is turned up, so the initial start speed also rises slightly to match.
Optional KILL/ LAUNCH Switch (Please advise if required)
While pressed IN, this switch cuts the Power feed to the car and motor, even if the trigger is pulled. Once released the power feeds in at whatever point the trigger has been pulled to. The idea is that your trigger is already pulled in so that all you need to do is release the switch to give you a quicker start from the line at the beginning of the race.
Power LED
The blue LED illuminates to shows that power is fed to the controller.
LED goes very dim when the trigger is pressed if no car is on the track or braids etc. have a problem.
LED extinguishes when full power is delivered to the car.
Specs
Wiring: Positive Wired
Controller Type: 36 Step PWM MOSFET drive/Transistor braking
Max Current: 5A Running with 12A Peak
Controller Type: 36 Step PWM MOSFET drive/Transistor braking
Max Current: 5A Running with 12A Peak
Model: TSMTIp
Shipping Weight: 0.5kg
Manufacturer: TruSpeed
Shipping Weight: 0.5kg
Manufacturer: TruSpeed
Additional Information
| Scale | No |
|---|
Related Products
My Cart
You have no items in your shopping cart.
Compare Products
You have no items to compare.
Community Poll