XPG20125 Paul Gage 20 x 12mm (1 Pair) XPG Super Soft Urethane Tires - for Carrera Cars and Slot it 15 x 8mm Rims

XPG Super Soft Urethane Rubber Tires for more Traction on Smooth Wood or Plastic Tracks

Suitable for

Slot it 15 x 8mm Rims
Carrera Cars:

Chevrolet Camaro (newer body style), Corvette C6R
Ford Mustang GT
AMG DTM
Audi A4 DTM,Audi R10.Audi R8
Ferrari 599xx, Ferrari 575,Ferrari 458 Street Versions
Old Enzo Ferrari (item #25702 and 25703)
Mercedes SLR,Mercedes SLS, Maserati MC12
Max Schnell, will fit the front and rear tires (27404 and 30613)

Slot.it:Porsche 956, Porsche 962, Ferrari F40, Ferrari 312PB, Mazda 787B, Jaguar XJR9, Chaparral 2E, Ford GT40, Alfa 33/3, McLaren M8D, 15x8 & 15x10 alloy wheels, Opel Calibra

The Paul Gage XPG Range of Super Soft Urethane Rubber Tires are designed for Excellent Traction on Smooth Wood or Plastic Tracks (Carrera , Scalextric, SCX and Ninco). The XPG Super Soft Tires have a Shore Rating of 20 with Normal wear rates. They will still work well on tracks that are not perfectly clean and No Tire treatments are necessary. You will also find Grip levels increases as the tires warm up.

Features

For Smooth Routed Wood and Plastic Tracks
Urethane Rubber Compound
Super Soft – Shore A20
Excellent Grip – more Traction
Normal Wear
Easy to Sand True
Handmade
Age Suitability: 8+

Safety Notice: Warning! This product is not suitable for children under 36 months, it contains small parts which can present a choking hazard.

Specs

Tire Size: 20 x 12mm
Outside Diameter: 20mm
Inside Diameter: 11mm
Overall Width: 11mm
Tread Width: 9mm
Rib Width: 5mm
Center Rib Height: 1mm
Compound: Shore A20 Super Soft Urethane Rubber
Scale: 1/32

Contents

1 pr x XPG20125 Paul Gage 20 x 12mm - XPG Urethane Slot Car Tires

For Optimal Performance

It is recommended to glue Paul Gage Tires to the wheels using clear nail polish and then lightly sand the tires to true them up.

This is easily done by first cleaning the tire with Acetone, lightly sanding the inside and outside beads of the hub, then paint a generous layer of clear nail polish on the inside bead and the outside bead of the hub (but not the Center Rib), and mount the tire and allow one hour to dry, then sand them true, and off you go.

Tire Identification and Part Numbers (XXX-NNNNNXXX)

Part Numbers consists of a 3 Character Prefix, followed by 5-6 Digits and a 1-3 Character Suffix.

XXX Three Character Prefix – XPG or PGT
Where Tires with a XPG prefix are a softer Shore 20 compound. And Tires with a PGT prefix are a harder Shore 40 Compound.

5-6 Digit Part No NNNNNN
First Two Digits: Outer diameter (in mm)
Second Pair of Digits: Overall Width (in mm)
Last Digit(s): Width of the Center Rib (in mm)

1-3 Character Suffix XXX, denotes the following
LM - Larger Center Opening (Lower Profile Sidewalls)
XD - Deeper Center Groove for wheels with a taller Center Rib
XXD - Even deeper Center Groove for wheels with a very tall Center Rib
FF – F1 tyre with Fat Sidewalls
SE – More rounded sidewall with a narrower contact patch. This helps in fitting tires to clear some body work. Also gives a more Street or Stock look on some models
V – Smaller vintage/classic size tires with 2mm grooves

Model: XPG20125
Shipping Weight: 0.02kgs
Manufactured by: Paul Gage Tires