PGT-CAR124-250GTO Paul Gage 28 x 11mm (1 Pair) PGT Soft Urethane Tires – Carrera Ferrari 250 GTO

PGT Soft Urethane Rubber Tires for more Traction on all Track Surfaces (Smooth Wood or Plastic Tracks)

Suitable for Carrera 1/24 Ferrari 250 GTO

The Paul Gage PGT Range of Urethane Rubber Tires are designed for Great Traction on all Types of Track Surfaces. The PGT Range of tires are manufactured from a Firm Urethane Rubber Compound with a Shore Rating of 40 for minimal wear rates.

The PGT Firm Compound Tires will work great on all Track Surfaces with Minimal wear rates. They will work well on tracks that are not perfectly clean. No Tire treatments are necessary and grip level will increase as the tires warm up.

Features

For Smooth Routed Wood and Plastic Tracks
Urethane Rubber Compound
Soft – Shore A40
Excellent Grip – more Traction
Minimal Wear
Handmade
Age Suitability: 8+

Safety Notice: Warning! This product is not suitable for children under 36 months, it contains small parts which can present a choking hazard.

Specs

Tire Size: 28 x 11mm
Outside Diameter: 28mm
Inside Diameter: 16.5mm
Overall Width: 11mm
Tread Width: 9mm
Rib Width: 6mm
Center Rib Height: 2mm
Compound: Shore A40 Soft Urethane Rubber
Scale: 1/24

Contents

1 pr x PGT-CAR124-250GTO Paul Gage 28 x 11mm - PGT Urethane Slot Car Tires

For Optimal Performance

It is recommended to glue Paul Gage Tires to the wheels using clear nail polish and then lightly sand the tires to true them up.

This is easily done by first cleaning the tire with Acetone, lightly sanding the inside and outside beads of the hub, then paint a generous layer of clear nail polish on the inside bead and the outside bead of the hub (but not the Center Rib), and mount the tire and allow one hour to dry, then sand them true, and off you go.

Tire Identification and Part Numbers (XXX-NNNNNXXX)

Part Numbers consists of a 3 Character Prefix, followed by 5-6 Digits and a 1-3 Character Suffix.

XXX Three Character Prefix – XPG or PGT
Where Tires with a XPG prefix are a softer Shore 20 compound. And Tires with a PGT prefix are a harder Shore 40 Compound.

5-6 Digit Part No NNNNNN
First Two Digits: Outer diameter (in mm)
Second Pair of Digits: Overall Width (in mm)
Last Digit(s): Width of the Center Rib (in mm)

1-3 Character Suffix XXX, denotes the following
LM - Larger Center Opening (Lower Profile Sidewalls)
XD - Deeper Center Groove for wheels with a taller Center Rib
XXD - Even deeper Center Groove for wheels with a very tall Center Rib
FF – F1 tyre with Fat Sidewalls
SE – More rounded sidewall with a narrower contact patch. This helps in fitting tires to clear some body work. Also gives a more Street or Stock look on some models
V – Smaller vintage/classic size tires with 2mm grooves

Model: PGT-CAR124-250GTO
Shipping Weight: 0.02kgs
Manufactured by: Paul Gage Tires