T87097 Tamiya Polyester Putty

This Quick Curing two part putty is designed for use with plastic models. It does not thin down after curing and is useful for filling holes or shaping after putting on models. Hardness of cured putty is almost the same as styrene resin, and can be shaped using modeling knife and Tamiya Finishing Abrasives. Cured and shaped putty can also be attached to model using CA Cement. This Putty can also be used for repairing metal and wooden models.

Due to its versatility, ease-of-use, and quick-curing properties, Tamiya Polyester Putty has become an indispensible tool for model builders. Tamiya has now packaged this putty in a new, smaller 40g tube that can be conveniently used up in one or two projects, thereby eliminating waste. A 4g tube of hardening agent is included for mixing with the putty prior to application. Yellow-colored putty can be used to fill holes and cracks, and quickly cures in 1 hour.

Easy to use. Mix putty and hardener to a 50:1 ratio (putty:hardener). Putty will begin to harden in 5 to 10 minutes.

Product Features

For Remodelling, Fabrication, Sculpturing, and Repairs
Fills holes, imperfections and seam lines on Plastic Models
Quick Curing, hardens in 5-10 min
Light Yellow coloured putty
Can be sanded, glued, tooled and painted after drying
Age Suitability 14+

Safety Notice: Warning! This product is not suitable for children.

Specs

Supplied in two parts
40g Aluminium Tube of Polyester Putty
4g Tube Hardener

Contents

1 x 40g Tamiya Epoxy Putty Resin (yellow)
1 x 4g Tamiya Epoxy Putty hardener

Model: T87097
Shipping Weight: 0.08kgs
Manufactured by: Tamiya