SC6283R Scaleauto Mitsubishi Lancer EVO V – Tommi Makinen Replica Red Edition

The Scaleauto Mitsubishi Lancer EVO V is a high-performance Competition Slot Car for Club Racers. This car is fitted with the new R 2.0 Chassis - with a 25º RT3 Anglewinder Motor Mount (0.5 mm Offset). And a Sprinter Junior 18 000 rpm, Long Can motor (SC0027b), Aluminium Rear wheels and Plastic Front Wheels. With Belt Driven 4 Wheel Drive.

The Scaleauto Mitsubishi Lancer EVO V features a detailed, lightweight body and interior, with high quality paint finish with sharp tampo printing.

Driver: Tommi Makenin
Car: Mitsubishi Lancer EVO V -Tommi Makinen Replica
Race: Street Car

Key Features

Belt Driven 4 Wheel Drive
R 2.0 In Flex Chassis with RT3 Offset Anglewinder Motor Mount
Height adjustable Front Axle
Support for Independent Front Axle Mounting System
RT3 Anglewinder 25º Motor Mount
Choice of 3 or 5 Motor Mount Fixing Points
Front and Rear Suspension Adjustment System
Highly Detailed Lightweight Body with Interior
Aluminium Rear Wheels with Plastic Front Wheels
3/32 Bronze Spherical Bearings
M2.5 Adjustable Screw Set
Magnatraction System
Sprung Guide with Reinforced Guide Area
Age Suitability: 14+

Safety Notice: Warning! This product is not suitable for children under 14 Years. This is not a toy. Keep out of Reach of Children.

Specs:

Motor: Sprinter Junior SC0027b Long-Can Motor, 18,000 rpm and 310 g/cm torque @ 12v
Motor Mount: RT3 Anglewinder Motor Mount 0.5 mm Offset (SC6536c Hard Red)
Motor Configuration: Pod Mounted Angle Winder Motor
Chassis: Updated R 2.0 - Chassis – Grey (SC6669)
Pinion: 9T Plastic
Crown Gear: 31T Plastic
Gear Ratio: 9:31
Bushes: Spherical Bronze
Guide: Red Sprung Swivel Guide (SC1608b)
Magnatraction: Rectangular bar Magnet
Overall Length: 135 mm
Car Width: 65 mm
Car Height: 43 mm
Wheelbase: 78 mm
Rear Axle to Guide Distance: mm
Body Weight: g
Chassis Weight: g
Total Weight: 69 g
Front Axle: Height Adjustable with M2.5 screws
Axle/Hub Width: 60 mm Front: 62.5 mm Rear
Axle Diameter: 2.38mm (3/32”)
Front Hubs: 17.5 x 9mm Plastic
Rear Hubs: 17.5 x 10mm Aluminium
Front Tyre Diameter and Width: 18 x 9 mm Slick – Zero Grip
Rear Tyre Diameter and Width: 19 x 10.5 mm Slick – AS25
Digital: No but upgradeable
Body: High Detail with detailed interior
Driver: Full length driver figure
Lights: No
Class: Rally/Street
Scale: 1/32

Contents

1 x SC6283R Scaleauto Mitsubishi Lancer EVO V – Tommi Makinen Replica Red Edition

Model: SC6283R
Issued: December 2023
Shipping Weight: 0.35 kgs
Manufactured by: Scaleauto