RS0007A Revo Slot Porsche 911 GT2 – White Race Kit A

The White Race Kit Porsche 911 GT2, is supplied with an unassembled and unpainted Body, with an Assembled Rolling Chassis. The Body requires Assembly and Paint to complete.

Revo Slot

The Revo Slot Company was formed in partnership with BRM to produce High Quality, Highly Detailed Performance Slot Cars for the Racer and Enthusiast. The original Company has been producing Finished Model Car Bodies for BRM and other Manufacturers. With this Partnership with BRM, they are now producing complete Slot Cars.

BRM was assigned the task of chassis design and development. The new BRM developed chassis features a Black Anodised CNC Aluminium Chassis with floating body mounts. The chassis is fitted with Aluminium Axle Carriers and Motor Mount with Aluminium Wheels Front and Rear. The Front and Rear Axles are 3 mm in diameter and mounted in Ball Bearings and fitted to the Lightweight Aluminium Axle Carriers.

History

The Porsche 911 (993) GT2 race car was developed to compete in international motorsports. This car was fitted with a rollcage, and had a stripped out interior to reduce weight. There were minor modifications to the bodywork and wings, to reduce weight and increase down force, and also to accommodate wide racing slicks. The Porsche 911 GT2 was powered by a modified engine fed by Twin KKK Turbo chargers with air restrictors, developing around 450hp. The suspension was also modified to improve on track handling.

The Porsche 911 GT2 competed in the BPR Global GT Series and several national series such as Daytona, as well as the 24hrs of Le Mans. Class Victories at Le Mans was achieved in 1996 and 1997.

Key Features

White Race Kit Type A – Large Front Air Intakes
Requires Assembly and Paint
Highly Detailed body
Detailed Cockpit with Driver figure
Anodised CNC Aluminium Chassis with floating Body Mount
Ball Bearings
Aluminium Wheels Front and Rear
Aluminium Motor mount and Axle carriers
Age Suitability 14+

Safety Notice: Warning! This product is not suitable for children under 14 years

Specs

Motor: FK130 - 21 000 rpm, 200 g/cm Short-Can Motor (RS211)
Motor Configuration: Rear Mounted Angle Winder Motor with Rear Wheel Drive
Pinion: 12T Brass Ø6.4mm (RS212)
Spur Gear: 33T Ø12.4 mm Nylon with Aluminium Hub (RS419)
Gear Ratio: 12:33
Bushes/Bearings: Ball Bearings Front and Rear Ø3 x 6 mm Flanged (S410)
Guide: Spring Swivel Guide (RS210 - 7 mm Fitted/ RS210W - 9 mm Supplied)
Magnatraction: Not fitted (Magnet Supplied)
Overall Length: 139 mm
Wheelbase: 74 mm
Car Width: 64 mm
Car Height: 36 mm
Body Weight: 25 g
Total Weight: 98 g
Axle/Hub Width: 61.5 mm Front and 63 mm Rear
Axle Diameter: Ø3 mm x 50 mm Hardened Steel (RS209)
Wheels: Aluminium Ø15 x 8.5 mm Front (RS108) and Ø14.8 x 10.5 mm Rear (RS109W)
Front Tyre Diameter and Width: Ø19.5 x 8.5 mm Low Profile Hard Compound (RS201)
Rear Tyre Diameter and Width: Ø20 x 11.5 mm - Stock 30 Shore (RS202W)
Digital: No but Upgradeable
Body: High Detail body with Lightweight interior - Type A Body (RS101A)
Driver: Driver figure
Lights: No
Class: GT, Endurance
Scale: 1/32

Model: RS0007A
Issued: September 2017
Shipping Weight: 0.40 kgs
Manufactured by: Revo Slot