SC6308R Scaleauto Honda NSX GT3 - #9 GT Masters Series 2018

The Scaleauto Honda NSX GT3 is a high-performance Competition Slot Car for Club Racers. This car is fitted with the new R 2.0 Chassis - with a 25º RT3 Anglewinder Motor Mount (1.0 mm Offset). And a 20 000 rpm Tech 1, Long Can motor (SC0011b), Aluminium Rear wheels and Plastic Front Wheels.

The Scaleauto Honda NSX GT3 features a detailed, lightweight body and interior, with high quality paint finish with sharp tampo printing.

Driver: Christopher Dreyspring and Giorgio Maggi
Car: GETEC NSX GT3 #9
Race: ADAC GT Masters Racing Series 2018
Team: Honda Tea Schubert Motorsport

Key Features

R 2.0 In Flex Chassis with RT3 Offset Anglewinder Motor Mount
Height adjustable Front Axle
Support for Independent Front Axle Mounting System
RT3 Anglewinder 25º Motor Mount
Choice of 3 or 5 Motor Mount Fixing Points
Front and Rear Suspension Adjustment System
Highly Detailed Lightweight Body with Interior
Aluminium Rear Wheels with Plastic Front Wheels
3/32 Bronze Spherical Bearings
M2.5 Adjustable Screw Set
Magnatraction System
Sprung Guide with Reinforced Guide Area
Age Suitability: 14+

Safety Notice: Warning! This product is not suitable for children under 14 Years. This is not a toy. Keep out of Reach of Children.

Specs:

Motor: SC0011b Long-Can Tech 1 Motor, 20,000 rpm and 285 g/cm torque @ 12v
Motor Mount: RT3 Anglewinder Motor Mount 1.0 mm Offset (SC6528c Hard Red)
Motor Configuration: Rear Pod Mounted Angle Winder Motor
Chassis: Updated R 2.0 - Chassis - Grey
Pinion: 11T Plastic
Crown Gear: 27T Plastic
Gear Ratio: 11:27
Bushes: Spherical Bronze
Guide: Red Sprung Swivel Guide (SC1608)
Magnatraction: Rectangular bar Magnet
Overall Length: 142 mm
Car Width: 65 mm
Car Height: 36 mm
Wheelbase: 82 mm
Rear Axle to Guide Distance:112 mm
Body Weight: 21 g
Chassis Weight: 68.5 g
Total Weight: 90 g
Front Axle: Height Adjustable with M2.5 screws
Axle/Hub Width: 60 mm Front: 62.5 mm Rear
Axle Diameter: 2.38mm (3/32”)
Front Hubs: 17.5 x 9mm Plastic
Rear Hubs: 17.5 x 10mm Aluminium
Front Tyre Diameter and Width: 18 x 9 mm Slick
Rear Tyre Diameter and Width: 19 x 10.5 mm Slick
Digital: No but upgradeable
Body: High Detail with detailed interior
Driver: Full length driver figure
Lights: No
Class: GT
Scale: 1/32

Contents

1 x SC6308R Scaleauto Honda NSX GT3 - #9 GT Masters Series 2018

Model: SC6308R
Issued: March 2024
Shipping Weight: 0.40 kgs
Manufactured by: Scaleauto